Bhansali can supply a wide range of control cables, i.e., copper/aluminium conductor. The control cables generally have the ability to transmit electricity and signals so that you can avoid transformation of signals from low voltage in order to control motors and relays. Electromagnetic disturbances generally have no influence due to the strength of the signals, or we can say that Control Cables play a vital and keen role in our industrial systems. The high flexibility in control cables is achieved by the use of fine wire copper strands, short lay lengths and by powdering of the cores to maintain core separation.

We are renowned for our control cables which generally have the following characteristics:

• Stranded/ Solid conductor
  
• Multi-core cables (available up to 61 cores)
  
• Primary insulation (Type A, Type C, HR-85°C)
  
• Voltage grade 1100 Volts
  
• Core identification as per ISI colour code along with numbering
  
• Sheath materials PVC ST-1, ST-2, HR, FRLS
• Unarmoured/Armoured (round wire/flat strip)
  
• Jacket materials PVC ST-1, ST-2, HR, FRLS

Description
Solid/ stranded annealed plain high conductivity electrolytic grade copper/aluminium conductor confirming to IS: 8130 (1984). Individual core insulated with extruded PVC compound type 'A' confirming to IS:5831 (1984). All such cores are laid up in a common covering of PVC called inner sheath armoured with galvanised mild steel wire/strip confirming to IS: 3975(1979) and finally jacketed with extruded PVC type ST-1 confirming to IS: 5831(1984).

Technical Data
For Copper, Control Cables, Type YY / YWY / YFY Conductor Solid/ Stranded
Colour Code: As per ISI
Working Voltage: 650/1100 Volts
Test Voltage: 3000 Volts
Insulation Resistance: 36.7 M Ohm/Km

Note: The cables specified above conform to BIS standards, We also design, develop and manufacture cables as per various other international standards like VDE, BS, IEC, ASTM, JIS etc., and also as per specific customer requirements.